Question about Kenmore Washing Machines
80 series washer that overflowes I had the same problem with a 90 series and there is a small hose connected to the water level knob that had slipped off. I have seen both bad water level switches and
Question about Kenmore Washing Machines
...level sensor on my Kenmore 80 Series Hvy Dty Washer? How do I check and replace the "water level sensor" on my Kenmore 80 Series Hvy Dty Washer? Water will not shut off on while filling the drum on ...
Question about Kenmore Washing Machines
...80 series washer. When I start the washer on any cycle with the lid open, it used to start filling with water and then would start agitating when the water had reached the appropriate level. Now it ...
Question about Washing Machines
...level and leaking-Kenmore washer 80 Water not cutting off at full level and leaking from underneath Kenmore series 80 heavy duty washer The water lever sensor/switch is not working and needs to be ...
...80 series model 110.28812790. The last few weeks I am having problems with soap left behind in each load. The machine seems to be spinning fine and draining good, but there is a lot of vibration in ...
Question about Kenmore Washing Machines
...80 washer wont stop filling water level where is the reset button non my kenmore 80 washer? it wont stop filling with water If this is a top loader then the vacuum line has come off of the dashpot or ...
Question about Kenmore Washing Machines
many gallons and max fill how many gallons of Water ONLY no clothes! The Series 80 washer has a max capacity of 20 gallons. At the lowest water level setting you would have between 14.5 and 15 gallons
Question about Kenmore Washing Machines
...80 water over fills wont shut off water level switch doea not work A level sensor may have failed If water level switch doesn’t work, replace it. Also could be water valve problem if only way to get ...
80 Washer: Water fill seems low When running the washer, the fill levels appear to be low. Is there a recommended fill level that should be reached (inches)? At the "small load" setting there is 4" of
...level what is the problem? kenmore series 80 Thanks for choosing FixYa and welcome to the site Roy. Your problem is the water level switch. This is what controls the level of water in the washer. You ...
3,909 questions posted
Usually answered in minutes!
3,839 Questions
2,098 Questions
1,642 Questions
1,023 Questions
908 Questions