... Did not notice any unusual noises. it sounds like a bad lid switch if it will not drain or spin,the switch controls that-mike my kenmore elite to load washer will not agitate the model number is ...
...Elite Oasis washer does not lock washer displayed UL , then did not commence cycle. It will not lock. First, OL/UL stands for "Overload", so in other words, the washer things the tub is too hard to ...
Question about Kenmore Washing Machines
...Elite (Heavy Duty, Kingsize Capacity, Ultra Quiet Pack, 3 speed motor with 6 speed combination, Catalyst Cleaning Action, Ultra Rinse) bought in Jul 2002 - would stop after it's first washing cycle, ...
...Elite washing machine that will not agitate. It sounds like it is trying to work but unless I hold down the knob on top it just keeps clicking. pop the top off the agitator,you will see 4 small ...
...Elite top loader that does not agitate after its filled with water and the lid is shut. I've tried all speeds. I had the same problem with my Kenmoore and had to replace the agitator...ordered the ...
Question about Kenmore Washing Machines
my kenmore elite oasis runs fine but wont go through spin cycle my kenmore elite oasis runs fine locks lid drains water and agitates but wont go through spin cycle.What will fix this problem? Try ...
Kenmore elite washer not agitating properly I have a Kenmore top loader model 23032100. It was purchased in 2002. It agitates fine for small loads but not large. I tried to inspect the agitator but ...
How to remove the agitator from a top loading kenmore elite washing maching The agitator on a Kenmore top loader can easily be removed by performing the following steps: 1. Remove the agitator center ...
...elite heavy duty top load washer The tub is full of water. The unit will not spin. The noise while it is trying to spin sounds like severe grinding "very loud". Will not agitate. REMOVE 3 SCREWS FROM ...
Question about Washing Machines
how to remove agitator bolt from kenmore elite washer 22952 I have removed softner dispenser and cap below dispenser. the bolt is suppose to be under this to remove the agitator. The bolt is flush to ...
3,909 questions posted
Usually answered in minutes!
3,839 Questions
2,098 Questions
1,642 Questions
1,023 Questions
908 Questions