Question about Electrolux Washing Machines
...open You will need to remove the drum and reset the alignment. The cloth is struck and has jammed on the drum movement. click this link: drum removal I can't afford a tech to come out and fix my ...
...drum, it is necessary to open the front opening, remove the gasket. Hence it is difficult. To do all this two people are necessary. The best way could be find out the one end of the wire, if you can ...
...back cover check if there is rust on the centre shaft,that means leaking throw the ceal and bearing.open the door and try to list up the inner drum if plays means problem with bearings as
drum is wobbling Open the door. 1) See if you can move the drum up and down, any slop would indicate shaft and/ or bearings 2) Turn the drum around and see if is running centrally. An off centred drum
...and now when I open the machine the drum is not facing up so I can't open it? It also won't spin. What do I do? There is clothes in there and the machine is off, but the drum seems stuck? Please
Question about Washing Machines
...open the door? Took the back off ... What am I looking for to know if something is broke? Front load washing machine? If it is it depends on what you mean by move the tub around, if it is just ...
Question about Maytag Washing Machines
Post Spin cycle drum winds down slowly- Doesn't stop w/LID opened The drum does not stop abruptly when the lid is opened during the Spin cycle like it always has in the past. The power to spin the ...
...drum breaings open the door and try to lift the center drum a little with your fungers if there is flop in the bearings there worn out they may also rumbel if you spin the center drum by hand,,,to ...
leaks from top of outer drum when viewed with front panel off.There are a half dozen or so small openings around top of outer drum (maybe where outer drum hooks/clips onto inner drum) water was viewed
Question about Washing Machines
drum turn (tried to open the back). is this front loader? if so, reach into the drum and try to move it up and down - there should be no play. sometimes the arm holding the drum will corrode and break
3,909 questions posted
Usually answered in minutes!
3,839 Questions
2,098 Questions
1,642 Questions
1,023 Questions
908 Questions