Kenmore 3.8 cu. ft. HE3t Front Load Washer "low water level" Questions

...low water level! Washer only has low water level in all wash settings. If the water levels are low in your washing machine then you could have a sensor that is faulty . The fill sensor will ...

...low or high. WATER LEVEL (WIL) SIW (KHz) Normal Level = Abnormal W/L Frequency Low Level = 30.00 Khz High Level = 15.00 Khz If the Water level is detected as low or high for more than 5 seconds, then ...

...be 30-36 inches from floor also be sure hose fits loosely in standpipe ..possible water is siphoning out after fill up since these are low water use machines any drop in water level can cause ...

...Water fill seems low When running the washer, the fill levels appear to be low. Is there a recommended fill level that should be reached (inches)? At the "small load" setting there is 4" of water in ...

...low water level. My wife says that she thinks the water used to be several inches above the bottom of the door's glass window. Now the water level is well below the glass window. If I run the washer ...

why is water level always low ? the water is always low in the wash & rinse cycle how low? do you have a water level switch? post model number

...Water level to low I belive the water level in my machine is too low. In all of the pictures it shows a water level that you can see throught the door but the water level in my washer is less than an ...

...keeps switching from fill to spin and won’t cycle through the rest. water level switch indicates water level to low so keep adding water your drain hose may be too low cause the water be sipon ...

...Low Level. Your water level is too low. Your machine isnt filling up properly or the water is being siphoned out as it fills which means your drain is lower than your water level. or your drain does ...

water on wash cycle is good but rinse cycle is low water level WASHER SWITCH SET FOR FULL LOAD AND TUB FILLS UP BUT ON RINSE CYCLE WATER LEVEL IS LOW check input water pressure