Kenmore Whasher shakes on spin cycle We have a kenmore washer that is on the pedestal and during any of the spin cycles the thing shakes violently. The machine is level what can we do? unfortunetly ...
Excessive Shaking The washer HE3T Kenmore Elite, shakes too much when on high. What to do??? Possible solutions... level, if on pedestal, make sure its tightly secure to washer, wash like size ...
tub shakes violently during spin cycle I would try releveling the machine by adjusting the legs at the bottom of the unit. If you got the unit that has the pedestal, check the legs on the bottom as ...
Question about Kenmore Elite Washing Machines
can not keep the HE 3 washer from jumping around on the spin cycle. Floor is level and machine is level with legs locked in place. Have lowered leveling legs to the base and locked them tight with the
WHERE CAN I FIND PEDESTALS FOR MAYTAG NEPTUNE WASHER AND DRYER MODELS MD55 AND MAH-1 MODELS? Don't...Unless you have a concrete floor you will never be satisfied with the pedestal. Your front loader ...
Question about LG Washing Machines
Badly shakes on spin cycle. Smooth on extra high speed only. The unit is on a pedestal and they are both leveled. The house in newer with wood floor joists that are solid. Does not matter what size ...
...pedestals. It is as level as one can get it, and although we havent placed the brackets on from the pedestal to the washer, i dont think that would be the problem. It has a terrible vibration to it, ...
...pedestals. It is as level as one can get it, and although we havent placed the brackets on from the pedestal to the washer, i dont think that would be the problem. It has a terrible vibration to it, ...
Question about Frigidaire Washing Machines
...we purchased a pedestal drawer by Frigidaire and installed it leveled pedestal and still gets shakes and noises Hi Stephanie, The higher you raise the dryer, the more pronounced the vibration ...
Question about Frigidaire Washing Machines
Frigidare Model # FTF2140FS1 problems with spin cycle The front load washer almost falls off the pedestal on spin cycle. Load is not out of balance. I made a pedestal of 2' x 10' with a plywood top ...
4,938 questions posted
Usually answered in minutes!
1,023 Questions
0 Questions
69 Questions
45 Questions
20 Questions