...pump motor. Unplug machine, take off front cover and look for a cleanout. Open it up, and clean out any debris. Also check hose going from tub to the pump. I have seen where that will fill up with ...
...pump you may need a torx screw driver to remove the cover to clean it out it may even have a part that has a plug looking thing witha handle in it if so turn off the water and get a bucket it will ...
Question about Kenmore Elite Washing Machines
...pump cleanout, get the googus out. Tech sheet is located behind the white box to the left which is the motor control unit (MCU). The tech sheet is an excellent tool which gives directions on ...
...cleanout from pump counterclockwise turn/you will get some water so lay down some towels put back togeather test ..now you can spend the 100.bucks on something more usefull LOL.. good luck thanks for ...
Question about Kenmore Elite Washing Machines
...pump.Please do rate the solution if the issue is resolved or post a comment for further assistance. Thanks Rylee I agree with Rylee except he forgot one thing else. I had stuff in the drain clean out ...
Question about Kenmore Elite Washing Machines
...pump out the water after I press stop after that it stays locked until I press stop again. I thn put it on the rinse and spin cycle and it will complete this cycle with no problems. annette I had a ...
Question about Kenmore Elite Washing Machines
pump at the bottom of that cleanout will be a torx headed screw remove that screw and squeeze the hose clamps for the 2 hoses to the pump and remove those hoses .you can then pull the pump out alittle
...pump cleanout, filling your catch can, and repeating the process. Once you have the water drained you can unscrew the pump cleanout catch filter and remove the clog. It is common to have this happen ...
Question about Kenmore Elite Washing Machines
...cleanout shoot. How do I get to it. Hello, Welcome to FixYa. Here`s how to check it and clean it... Though it being full of water may make it messy. A wet-dry shop vac is handy in this situation. If ...
cleanout to the pump. Large mess on the floor. Make sure you unplug the machine first. It will get on the wiring. I also learned recently that your house electrical needs to be correct. These machines
4,939 questions posted
Usually answered in minutes!
1,023 Questions
0 Questions
69 Questions
45 Questions
20 Questions