Lorex 4 Channel Home Surveillance System "camera power" Questions

power!!!! camera wont' turn on now CAMMERA DESTROYED !! MOTION LIGHTS USE 120 VOLT AC POWER CAMERAS USE 12 VOLT DC POWER WRONG TYPE AND AMOUNT OF POWER !!! fried camera should 12 dc or dual voltage at

power is what is killing the last camera. The system is rated to run 15 cameras on passive power, so long as you have a true 110vac on a 25 amp circuit. If you are running 110vac on a 15amp and truely

...camera POWER wires will be "the other ones". There is NEVER an on/off switch on a surveillance camera, and for a good reason: what the heck good would it be, if you could just sneak up on it from ...

...camera housing are underpowered or not getting power at all, they should be getting power from a separate power source, check for any unplugged transformers of blown fuses in the camera power

...power supply to this camera. You will first need to have a 24v ac power supply. There should be 2 screw terminals on the back for power. Wire your power supply one leg to each terminal. Polarity will ...

...power from 1 of the working cameras to the problem camera but I am still having the same problem. Can you give me other options to try to resolve this problem? Try a separate power supply, if that ...

...be more specific?- you will  need a 9v DC adaptor for the camera to turn it on. you can google " BB-HCA3CE " for the power supply.- of you can use a Poe switch of injector for the camera

VIDEO LOSS ON ALL 4 CAMERAS ALL 4 CAMERAS ARE NOT WORKING Check the power supply for all the cameras, most likely your power supply for the cameras is defective.

...camera.. Check the voltage of the power supply with a voltmeter at the camera while in operation. If the voltage is several volts less that it's rated output, then the supply needs to be able to ...

...power each camera separately. If using a power supply (transformer and power supply board) you are most likely running your cameras at 24VDC. Again, purchase another power supply with the same ...