DISH Network ViP 612 "receiver power" Questions

...the back of the receiver but power and try again. connect the receiver to a different outlet (still with nothing else connected) if you still don't get a power light on it then the receiver is

...receiver's Power light comes on when I aply power to the receiver but after 5 seconds goes off. Why? dave2551, When the receiver is rebooted, the power light will come on and then go out. This is ...

...receiver is plugged directly into the wall. It will power upand require the signal and download the program guide. If you have any questionsI will leave my e-mail [email protected] will ...

...POWER RECEIVER FROM REMOTE OR RECEIVER. HAS TO PULL OUT PLUG AND REPLACE. POWER COMES ON RECEIVER WORKS, THEN AFTER A FEW MINUTES TRIPPS OFF AGAIN. Beverly Gobin,It sounds like the receiver may be ...

...you can do a reset by unplugging the power cord from the receiver for 10seconds and plug it back in. I will leave a link to help with this. ...

...power supply. Have you unplugged the receiver from the electrical outlet? If not, unplug for 10 seconds and plug back in. This will reboot the receiver and have it reacquire the satellite signal. If ...

...receiver the power light is off. Now, this receiver has no power button. Only a stand by button. Somebody knows how to make it work again? I had to replace the power supply in mine when it did

My DTC 6200 converter/decoder was working fine. A few weeks ago I have disconnected it, pull the power cord out of the AC outlet, put the decoder in a safe place. Then when I finish painting, I hook ...

...receiver by pressing the red reset button either on the side on the receiver or behind the door on the right side front of the receiver. If all else fails you can unplug the receiver from the

power the receiver up and down, but nothing else. I tried unplugging the receiver for 30 drconds and plugging it back in...same results. Please make sure the receiver is plugged directly into the wall