...turn it to adjust the time. Never take your watch into the water unless the crown is fully screwed in finger tight or water will get into the watch movement compartment and ruin it. Good luck, hope ...
...turn chime on or off. When alarm time is reached, watch will beep for 20 seconds, or until any button is pushed. Alarm will repeat every 24 hours until deactivated. INDIGLO® NIGHT-LIGHT WITH ...
...turn it away from the body if you have the water-resistant model) when you are finished. Digital Watch1Locate the three buttons on the side of the watch face. These are the buttons used to set the ...
...on the side doesn't seem to pull out. On some watches the winder needs to be turn anticlockwise about a quarter of the turn before pulling it out. This is to increase the water resistance of the
turn all sound off on casio ca-53w watch Go to calculator mode and press the adjust button (recessed one on the right hand side of the watch)
out to set time In some watches it is necessary to turn the crown wheel (usually anticlockwise) before pulling it out. (This is to give added water resistance).Try turning it left before pulling
...water resistant If the crown normally tightens and you are unable to secure the position, the answer to your question is yes, the winding position adds extra security when it comes to water moisture ...
Question about Casio Watches
...keeps coming on when i move my wrist, wearing down the battery g shock watch mtg water resistant 200mwave ceptor/tough solar press and hold the light button and it will turn off the auto back
the crow dont pulled out On some watches the crown screws in to increase water resistance. Try turning the crown anticlockwise before pulling it out.
...water-resistant watches require the setting crown to be screwed in to secure water-resistance. If your watch case has a protrusion with screw threads, the crown must be screwed in after setting the ...
1 questions posted
Usually answered in minutes!
2 Questions
1 Questions
4 Questions
1 Questions