needle clamp screw counterclockwise until the needle comes loose. This screw is located on the side of the small box, known as the needle clamp, that holds the needle in place.Remove the old needle by
needle clamp screw counterclockwise until the needle comes loose. This screw is located on the side of the small box, known as the needle clamp, that holds the needle in place.Remove the old needle by
Question about Singer Sewing Machines
...needle clamp. Is there a wee block that goes with clamp and shaft to hold needle in. Recent answer from repair shop says it's needed. I think he is wrong. Don't know if this will help: Singer ...
Question about Brother Sewing Machines
...needle clamp screwCorrect needle insertion is mandatory for proper use of sewing machine.Raise the needle bar to the highest point, then loosen the clamp screw to remove the old needle, place the new ...
Question about Sewing Machines
...Needle Clamp Screw. Do you recognize it from this eBay selection? ...
...needle clamp screw, undo the the needle clamp screw & take out the needle, & place the new needle in correctly, if the eye of the needle faces you, then it must be put back in the same ...
Question about Bernina Sewing Machines
...HAX1 or 705H Bernina, Schmitz, what size? 90? Is there a broken needle in the needle clamp? If you are trying to use a 100-120 needle thickness sometimes they will not slide up into the needle ...
Question about Sewing Machines
grab the needle and tighten. What can I do? It may be that your needle clamp has developed a crack or the threads are stripped inside the needle clamp. Replacing the needle clamp and ***** should help
Question about Bernina Sewing Machines
...needle clamp assembly from bernina 1090? Remove the needle bar clamp screw. From the back side of the needle clamp holder, remove the small needle stop screw. The clamp can then be slid down off the ...
needle clamp won't attach to needle bar I was sewing heavy material for a ferret bed and talking to my daughter when the needle jammed, came down on the needle clamp,bent the thread guide.When I tried
222 questions posted
Usually answered in minutes!
764 Questions
337 Questions
294 Questions
223 Questions
150 Questions