...top thread looks great, but turn over the fabric and you have a mess. Any advice is welcome. Usually if your bobbin thread is loopy it's because the TOP thread is not threaded right. Try threading it ...
...top tension as recommended by the mfg - this is usually between 3 - 6. Now re-thread the machine with the presser foot up and see if this doesn't eliminated the loopy stitches. What appears to be an ...
Question about Janome Sewing Machines
...machine RAISE the presser foot and then re-thread from the beginning Verify that it is threaded correctly Retest the stitch on a scrap of the same fabric you were sewing. If the upper thread is still ...
Question about Baby Lock Sewing Machines
...top thread from the machine.
ALWAYS RAISE the presser foot and rethread from the beginning. You may need to loosen the top tension to get it where it should be. The two threads should meet in the ...
Question about Singer Sewing Machines
...sewing machine is loopy. This was a problem with the Toyota machine, which I have now ditched, as being worthless and too much trouble. Re-check your stitch sample. Pull on the loopy thread. Is it ...
Question about PfaFF Sewing Machines
...midway point (probably will need to tweak this tension depending on your machine). Sewing Lesson 10 How to Fix Tension on Your Sewing Machine Understanding Thread Tension Threads Sewing Machine ...
happen, the upper thread is not in the tension assembly and you should rethread properly. Also, make sure thread is in the take up lever that moves up and down on the front of the machine while sewing
Question about Sewing Machines
...sewing machine or serger... is the loopy thread on top or bottom? when is the thread tight? what type of cotton fabric,, solid cotton--polyster cotton? normally mine stays on 4 or 5 --depends on ...
Machine keeps sewing loopy under neath When sewing thread goes in loops underneath change the needleadjust the top thread tension one number or letter higher till the stitchlook betterrethread the ...
Question about Sewing Machines
...top threading and tightened the tension and its still loopy underneath Not knowing your machine make/model, this is a guess. Be sure to Always Raise the presser foot when threading the top thread. ...
134 questions posted
Usually answered in minutes!
764 Questions
337 Questions
294 Questions
223 Questions
181 Questions