Question about Janome Sewing Machines
...presser foot pressure. Space between feed dogs & presser foot is too tight to pull a piece of fabric out with foot down. Diagonal seams get pushed out. You should not be able to pull fabric from the ...
Question about Singer Sewing Machines
...presser foot is up the upper thread is loose, but when the presser foot is lowered the threah gets too tight, what I notice is that in the thread path when you lower the presser foot it is been ...
presser foot lifter is stuck can i fix it presser foot lifter is stuck. can i fix it its a portable sewing machine bicor vx1005 If you can't lift the presser foot up at all undo the presser bar screw ...
Presser foot The pressed foot keeps falling off when I sew or lift the pressed foot. How can I fix this? Make sure that the presser foot is screwed in tightly.
Question about Brother Sewing Machines
presser foot is to tight on fabric causing it not to move and there is no adjustment dial Fabric will not feed because the presser foot is to tight. My machine has no external dials or knobs to adjust
Question about Singer Sewing Machines
...that the thread is not passing, when the presser foot is up the thread passes but when the presser foot is down it is too tight to sew. See solution I suggested 10 seconds ago. Hope it ...
...presser foot bar is tight, and the foot can still be moved, it is likely that the presser foot bar has become loose within the lifting mechanism. You could save yourself some trouble by taking your ...
...presser foot wont go up it stays down. The presser bar is not moving, there is a set screw that controls the presser foot height on the bar, it may be to tight. Take the side cover off, and look for ...
Question about Sewing Machines
...presser foot is up the thread passes but when the presser foot is down it is too tight to sew. Make sure you set tension @ 4. Make sure thread tail 6-7" long and underneath center of foot. Using ...
...presser foot down. When I pull the presser foot up, it flows without problem. It sounds like the tension setting is too tight. The tension mechanism consists of two metal disks; the thread runs ...
134 questions posted
Usually answered in minutes!
764 Questions
337 Questions
294 Questions
223 Questions
181 Questions