Brother XL-2600 "hook timing pick" Questions

...just when the needle bar is about to rise, the hook point should snag the thread. If it doesn't then the timing is off - or the hook has to be turned to the proper place and the set screw

...around again. Could this be a timing problem? The fact that the hook is picking up the thread correctly makes me doubt it. Any suggestion? upper thread tension needs tightening or timing

timing. While the needle is on it's way to the needle plate the thread is picked up by the hook(sharp, under bobbin). If the hook and needle aren't in the right position the thread won't be picked up.

it still does not pick up the bobbin thread, the needle/hook may be out of time, requiring service. Sewing Machine Needle Not Catching Thread Sewing machine won pick up bobbin thread hook timing fix /

hook timing where the needle and the hook are not in the correct place for the hook to pick up the needle thread could be the needle in installed incorrectly so the cut away section is not in place to

...end of the needle eye is approximately one full needle eye length above the point of the sewing hook. So do I adjust the Needle Bar or change the Sewing Hook timing. I would think the sew hook ...

...hook timing? try turning the bottom spool upside down. looking at the shuttle in your palm the thread needs to be on the left hand side winding / facing anti clockwise to catch in the hook see link ...

...hook timing issue either from a timing belt or gears. If the hook turns smoothly, perhaps just timing the hook will solve it. If the hook does not turn or feels chunky as you turn the handwheel, you ...