Question about Singer Sewing Machines
...bobbin in machine it doesn't catch bobbin thread. Is this still timing Removed bottom of machine and fixed timing by adjusting wheel. when I spin needle when empty, the hook catches thread however it ...
fix it Take it to a Janome dealer for repair. Bobbin winder sensor needs repair or replacing I had my sewing machine repaired twice by Janome, but the problem remained. My bobbin winder would do a few
Question about Janome Sewing Machines
bobbin holder in the machine, causing the machine to jam. How do I fix this? I know this is probably not the answer but: are you sure the thread is coming off of the bobbin on the left side (bobbin in
...bobbin's tension, and alter the timing of the machine as a whole as well. Not a cheap fix, sadly(Local to me, for example, this will cost about 70 bucks to have fixed. Do NOT try to do this yourself, ...
fix this problem! Your bobbin winder has seized. Remove the top cover and oil the area where the bobbin winder shaft goes through the bobbin winder assembly. You might need to force the winder to turn
Question about Sewing Machines
...fix bobbin winding from skipping on Shark Euro Pro X model 7133 sewing machine Whenever I go to use the model 7133 sewing machine to wind the thread on the bobbin, I have to push the foot pedal down ...
fix most problems. But, if you are still having problems, look at the thread in the problem bobbin. It should be straight and tight. If it is kind of wobbly and a little loose, you'll need to wind the
fix error E4 whe no thread is tangled? The machine displays E4 which means that thread is tangled or the bobbin was stopped suddenly and there is no sign of either of those problems on my machine. try
bobbin thread.not sewing! How to fix? try changing the needle rethread the machine top & bobbin make sure to use every thread guidemake sure the bobbin is not damaged or warped make sure the
...bobbin jumps My machine isn't picking up the bobbin thread correctly. It seems that the bobbin is 'jumping' and the bobbin thread is tangled. I've cleaned, replaced the bobbin, replaced the needle, ...
68 questions posted
Usually answered in minutes!
132 Questions
105 Questions
66 Questions
64 Questions
46 Questions