Husqvarna Rose "presser foot won down" Questions

presser foot for the first time and I can not get it to sew T I have a new machine and do not understand the buttonhole instructions in the manual. How do I install the buttonhole presser foot and get

...presser foot is not down and it is so it won't sew I'll be sewing away and the machine will beep and quit sewing. It shows that I need to lower the presser foot. It is already down! it ...

presser foot to baste the opening of the fabric shut using 5/8 inch seam allowance. Press the seam allowance open. Place the zipper teeth side down on the seam allowance and pin the zipper to the seam

Presser foot won't go all the way down See my other reply on 180 foot lifter

...presser foot bar and pull it down.  It is likely that the loose bar has jumped off of the cam on the lever.  you'll need to figure out how to get in there and tighten it or replace a ...

...presser foot doesn't go all the way down.Everything else seems fine and I have the machine regularly serviced Is your machine fitted with a knee-lifter ? If so, its possible the knee-lift ...

...presser foot blinking on the screen even when the presser foot lever is down. check the connections,   if they are   good,  your foot  pedal  has  a  short  in ...

...presser foot won't go up and down. Any suggestions? My presser foot won't go up and down. Any suggestions? it's very possible that a part in your machine has come loose or brokenit ...

pfaff 1371 hand wheel is frozen and presser foot won't lift up or down Powers up and all else seems to be fine. the machine needs to be checked to see what's wrong with it

...presser foot won't stay in the up position A few years ago my machine was serviced when the computer board was replaced. Ever since then the presser foot will not stay up (which is obviously ...