Janome Harmony 2039 Mechanical Sewing Machine "put teeth down" Questions

...put the teeth down? you either have a plate that goes over the feed dog teeth or you have a lever, usually next to the bobbin access door on the front of the machine. You did not say what model you ...

...put the teeth down so they dont catch when embroidering with a free foot Thanks Natasha Searls-Punter hi again i managed to sort my problem i knew there would be some knid of switch but i didnt no ...

put two screws back into it. Now the plate won't stay down. I've broken two needles already trying to sew. I don't know what else to do. I worked fine before I looked into that little hole, now it has

Material is not being fed thru When I put the material down to sew thru. nothing is pulling the material thru. Check for lint in feed teeth

teeth) if they do not stick up above the base line of the machine, they cannot feed the fabric. If this is the case, look in your manual (or and online manual for your machine) and find out how to put

...Put the stitch length dial at the longest stitch. Turn the wheel and see if the feed dogs move about 1/4 inch. Also check to see that they rise just slightly above the needle plate. If it does these ...

...teeth are down, push in a lift upward to be sure it's in the "Up" position. Then look on the left side of the machine, you'll see a dial, (NOT the dial facing you as you sit in front of the machine) ...

...down position, look at the area where the needle plate is and see if you can see the feeddogs?you can even run your finger over that area and you should be ableto feel the teeth. if you can feel the ...

put the narrow side toward the zipper teeth, and the wider side away from the zipper teeth. Step 4 Attach the zipper foot to the sewing machine. You may need to line up the bar on the zipper foot with

...put the teeth on my Brother LX-3125 down, How would i? I am making a quilt and i don't want the teeth up, and i asked my mother what i should do, she didn't know.(She has been sewing ...