Question about Sewing Machines
...foot holder to have that foot drop off. Set the pressure dial to 3 before attaching the new presser foot. For snap-on feet, align the pin of the presser foot (the horizontal bar in the middle of the ...
Question about Sewing Machines
...foot holder attached to the machine, & the feet to the machine will either be snapped on to the foot holder or there is a screw to undo. most of the new machine are snap on feet, take the presser ...
...holder when lifting foot despite tightening screw holding the holder any advice please fitsy off try tightening the screw that holds it on. If there isn't a screw then get one.This should work unless ...
foot holder - press the button to release the foota clip on foot with a little lever at the back of the pressure foot holder - lift the lever to release the foot If it is a clip on foot, then you
...foot holder assembly I have a very old Elna v/no/62. I need to use a piping foot but cannot find one for this model. Can I get a foot holder that I can use to clip-on a new piping foot onto the old ...
...foot holder and the foot will drop. To snap on: Place the presser foot so the pin on the foot lies just under the groove of the foot holder. Lower the foot holder to lock the foot in place. Select ...
need presser foot holder ned a presser foot holder and a regular presser foot Here are the parts you need: Brother Sewing Machine Presser Feet & Shanks thing that holds presser foot spring nut
...Foot Holder will not pick up the Presser Foot, none of them will snap in. The Snap-On button seem to be just sitting loose, it does nothing. Sounds like the spring has gone/broken in the foot holder. ...
Question about Singer Sewing Machines
...foot holder for my singer 247 machine, so that I can use a variety of snap on feet like invisible zip foot, gathering foot etc. I followed all the instructions on how to attach snap on feet to this ...
foot holder until the cut out is directly above the pin on the foot,,as you lower the presser foot holder the presser foot will automatically engage when put down on the pin area the second is a shank
51 questions posted
Usually answered in minutes!
565 Questions
193 Questions
102 Questions
90 Questions
79 Questions