...needle bar has been pushed up and is out of adjustment. You need to take off the side cover, there should be a screw on the back of your machine holding it on. Remove this screw, and remove the ...
Question about Bernina Sewing Machines
needle bar won't complete a full rotation, what's the fix? Bernina 440qe needle bar stops at the top of the machine and won't advance. Can I adjust the needle bar or does it need ...
Question about Singer Sewing Machines
...needle bar won't go down when any of the pictures are selected to sew, duck bear. The letters work and all the straight stitches and zigzags. Any ideas? Hi Karen, Looks like your machine is stuck in ...
...NEEDLE BAR FIREST U WILL FOUND TOW SLASH ON NEEDL BAR THE HIGHST ONE FOR HIGH OF NEEDLE BAR BRING THE HANDWHEEL AT LOSET POINT DOWN AND LOSE THE SCREW FROM INSID AND MAKE THE NEEDLE BAR AT HIGH SLASH ...
Question about Juki Sewing Machines
...needle bar is stuck down. I was able to get the needle out but cant move the bar it sits in. It is so low i cant even get another needle in. When i push the start sewing button it goes clank clank ...
needle is stuck Can you please elaborate? Is it stuck in the needle bar? Is it stuck in the fabric? Is it stuck in your finger?
bar that holds the needle looks bent. It moves freely up and down and side to side. When the needle comes down it is close to the left side of the pressure bar. After reading these tips, I'm wondering
Question about Bernina Sewing Machines
...needle bar and if it gets stuck with old or sticky oil it will require some patience and dexterity to spray with oil degreaser and flexing that lever until the old oil desolves and that finger can ...
Question about Sewing Machines
position, could have gotten stuck by accident, also put a piece of fabric under the needle and press on the foot pedal to make the machine "go". It should begin moving the needle bar and straighten up
Question about Bernina Sewing Machines
needle bar is stuck in the down position. I was embroidering and all of a sudden the needle movement became sluggish and then stopped. Rebooted machine, removed embroidery hoop, needle, bobbin, thread
743 questions posted
Usually answered in minutes!
193 Questions
102 Questions
90 Questions
79 Questions