Janome Memory Craft 9000 Computerized Sewing Machine "fuse" Questions

My machine shows an error number E1what is it 385.19233400 The error code 1 indicates the fuse on the A board has blown. The fuse should be replaced with a part number 000182177 fuse. The original ...

Janome memory craft 9000 fuse blowing I have replaced the fuse, cleaned and oiled machine. Turned it on, screen came on, screen functions. Placed bobbin in as manual instructs. Checked threading and ...

need fuses for janome 4000 You can get the fuse at Radio Shack. Part number 270-1065. It is a 3.15 amp 250 volt slow-blow fuse. If you replace the fuse and it blows again, you need a new A circuit ...

fuse blew on bernina 180 artista sewing machine advised to go up to a 5 amp fuse blew another part now has a small burn hole in it Please refund my $30 I may need a new circuit board Herein is a ...

My fuse has blown twice and the hand wheel is tight. How and where do I oil the hand wheel? We are missionaries in Mexico and cannot take it to a repair shop. We have replaced the fuse ourselves. It i

Hello! My Bernina 1120 blows the F150 fuse immideatly when power on. First blown fuse was all black The others just slightly burnt. What could be wrong with the machine. Thanks! /Nisse Page 46/47 has ...

I have a Pfafp1475CD it needs a fuse & green batteries It needs green batteries and a new fuse which i have no idea were to find it on my machine the fuse that is. it should tell where the fuse is

Fuse keeps blowing Last year I had a fuse blow. Took my husband a while to find the problem. This year, it happened again. He replace the fuse and then the next time I went to use the machine it blew ...

Does this machine have a fuse? It was running perfectly and just stopped. No noise or anything, just stopped..im original owner andmit hasnt been used for over an hour Since a make & model was not

The fuse on the back board has blown. The f1 fuse is 125v/t5a. I soldered in a new fuse same specs. The machine ran at first then died. The machine comes never runs just beeps 2 beeps Likely the fuse ...