Janome D'cor Excel Pro 5124 Mechanical Sewing Machine "zero stitch length" Questions

To baste, set the stitch length as high as possible (zero is a non-stitch length, probably 4 or 5 on your machine is the largest stitch length). Set the stitch width to zero so there is no zig-zag. ..

your fabric forward or backward. This might be your problem if you recently created a buttonhole. Most sewing machines require you to set your stitch length to zero for the automatic buttonhole stitch

...zero stitch length, five would be the largest stitch ...

...zero stitch length. Please advise. Your sewing machine probably needs cleaning and oiling. Follow the instructions in your owner's manual and use ONLY recently-purchased good quality sewing machine ...

...Elnagraph where the disc is locked in. Turn stitch width to zero, stitch length to zero and make sure that the stitch selecter is on the "Disc" icon. Then press down ******* the metal centre

...stitch width of zero. If you are sewing a very heavy fabric, then lengthen the stitch length up to three. If you make the stitch length longer such as four, then the seam will pull up and gather the ...

stitch length control is moved upwards, beyond the 'zero' position to make it sew backwards. To demonstrate, with the machine off, adjust the stitch length to '2' using the knob on the

...stitch width knobs to zero, (always set them to zero first to avoid wear on the stitch selection mechanisim) then turn the left stitch selector knob to the blue button hole symbol. Now turn middle ...

...stitch length to a lower number. At a zero, the sewing machine may not actually make stitches, since the needle will go up and down in one place. Cut a small scrap of fabric, preferably the same type ...

...stitch.  First set both to ZERO.  It won't move then set one to half way.  This will show you which dial is which.  If it is the width dial.  You'll get a bar ...