...center. The whole arm wont lock into a center position for sewing, and sews on the lef when the dial says it should be in the center. You will need a repair for that it sounds like an internal ...
...get the reverse lever to work? If it is a mechanical machine, things could be frozen. Levers & dials frequently will freeze due to lack of cleaning/oiling. Feed dogs are especially vulnerable ...
Question about Sewing Machines
...DX 2022 is frozen How can I free it If it is a mechnical machine (not computerized). Possibly the dial mechanism is stuck due to old oil. I apply a couple drops of liquid Tri-Flow Synthetic Lube to ...
...sewing machine Model # 385 -1695180. It repeatedly has the same problem: the stitch selector dial does not work and is always set on straight stitching no matter what stitch is actually ...
... then try to work it back and forwards. First though, always set the stitch length and stitch width dials to zero before you try to move the needle dial, this applies to changing the stitch selector ...
Question about Sewing Machines
I can turn the external dial but it only lengthens a little. There has to bea way to internally adjust that so it goes to longer stitch Cleaned oiled adjusted timing for other reasons. When I have top
...up), spray with "Tri-Flow, liberally inside. Pay attention to the right 1/2 and behind the front dials. In Front, each dial has a small square opening on the side, use the tube included with the ...
does not go in reverse when pushing in the reverse button. this is an internal problem with the dial or reverse button
brother sewing machine sews in reverse only you will need to have it serviced sounds like an internal issue with the dial
Stitch length dial is stuck on SS I have a Brother XR-65 Sewing Machine. The Stitch Length Dial is stuck on SS (Stretch Sewing) Likely broken threads wrapped around internal components. Have it ...
124 questions posted
Usually answered in minutes!
565 Questions
193 Questions
102 Questions
90 Questions
79 Questions
