Janome 8080 Computerized Sewing Machine "work reverse" Questions

...after working it in and unjamming the part from the down position, the forward and reverse now work! Huh, right? Hope it continues to work well. It is a smooth running machine, otherwise. Good

...reverse doesn't work either :( My machine works great...except my reverse doesn't work. It just stays in place, then eventually will move slightly in the reverse direction. :( Check the spring inside ...

reverse may not work. Increase the stitch length. If the stitch length is not the issue then you may have a frozen reverse slider. In this case, remove the bobbin case, thread, and needle then place a

work in reverse? I am not pressing the reverse button I have not worked with the machine for a couple a years now and when I tried to sew new curtains it only worked in reverse - I managed to complete

...the reverse didn't work. Now I got the reverse button to work but it won't sew forward. Maybe there's a problem with the reverse and forward button.For sewing machine ...

...reverse "gear" would be by a switch reversing the polarity of the current supplied to the motor. I think you need to do a little research to discover how your machine should work before you begin ...

...reverse button to work. I followed the directions and it just seems to sew in place. My old Singer was easy. You just pushed reverse and it reversed, in straight or zigzag stitch. It threads the ...

...reverse button didnt work. any suggestions on what to do to get it to work. thanks if the gear or button that works the reverse is worn or broken or come loose then it would have to be fixed at a ...

...had been pulled or popped out of ... All I had to do to fix the button was to hold the button in, and then push the cap forward. ... My 1120 Bernina reverse button will not work and the person who

...reverse. My friend used to work with a repair man, she said to open bottom some times thread is bound up, and may need oiled. My husband checked and found a bunch of lint and dust, he removed it and ...