Necchi 6015 Mechanical Sewing Machine "wont move presser" Questions

...wont go up it stays down. The presser bar is not moving, there is a set screw that controls the presser foot height on the bar, it may be to tight. Take the side cover off, and look for the presser ...

...wont raise and lower My designer 1 hisqvarna has been working fine and then it all of a sudden will not lower or raise the presser foot. I had to remove the whole presser foot attachment and foot to ...

wont move, but the Hand Wheel does Almost all home sewing machines are a fixed presser foot type - the cloth is fed by the serrated ratchets on the bed under it. Expensive walking-foot sewing machines

...presser foot bar wont stay up when I lift the lever, now im questions how far high should it go or if there is anything else i need to unscrew im down to the bones of the machine at this point, feel ...

...wont move the material Do the feed dogs move above the surface of the needle plate? If not, then the feed dogs have been dropped for darning or they have seized from lack of oil. Wheel on right side ...

wont catch The presser foot is not suppose to feed. It's purpose is to hold the fabric in place as the feed dogs feed the fabric from the front to the back of the machine as stitches are formed. Check

...wont feed my fabric through Are they in the raised position? Are they dirty--debris stuck between the teeth? Is the stitch length set to a higher number that will produce a longer stitch? Are they ...

wont move The white lever that raises the presser foot is frozen with the foot completely down on the plate. The machine was given to me, but I've seen it work it sounds like the machine needs

...wont the material move on its own when sewing its a brand new janome j3-24 and i cant get it to work? Are you lowering the foot that is under the needle? the feed dogs and the presser foot have to ...