...Thread tension is incorrect. See the links Incorrect thread tension - Brother Solutions Center support.brother.com/g/b/faqend.aspx?c=au&lang=en&prod=hf_ns55eas... Jul 30, 2014 - Turn the ...
Question about Janome Sewing Machines
...thread tension, either the tensioning mechanism has failed or it has not threaded properly. Once you have verified the top thread tensioner is working, you need to check bobbin thread tension. Make a ...
Question about Sewing Machines
...thread tension. To check top thread tension, move presser foot up, then make slow steady pull of the top thread. The thread should advance smoothly without hesitation since raising the foot releases ...
Question about Sewing Machines
...thread tension need adjusted Generally, tension adjustments are made using the upper thread tension. Most likely the upper tension is set too tight and is pulling the bobbin thread up. Loosen the ...
Question about Sewing Machines
...top thread down. Increasing the top tension pulls the bobbin thread further up, decreasing top tension will allow the bobbin thread to pull the top thread down. Understanding Thread Tension Threads
Question about Sewing Machines
...thread tension by setting tension at 2, then with foot up (zero tension) make long steady pull of top thread. Then move foot down and make another pull of top thread. There should be na notable ...
thread tension is not adjusted up properly tighten the setting until you have resistance when you pull the thread to thread the needle Check that the bobbin is inserted turning the proper direction in
thread tension is too high or your lower thread tension is too low. Make sure your bobbin thread is correctly routed under the tension spring. There is a small screw on the bobbin case that always you
...thread tension or top thread feed issue. Be sure needle isn't barbed at tip. If your machine has a horizontal spool pin, be sure the spool cap is larger than the spool and the thread unwinds from ...
...thread tension too loose (no tension) but can be bobbin thread tension issue. Be sure to thread per machine instructions. See following Singer video... testing top thread tension. ...
44 questions posted
Usually answered in minutes!
111 Questions
91 Questions
75 Questions
56 Questions
44 Questions