Necchi 6015 Mechanical Sewing Machine "thread lever moving" Questions

...thread take up lever will not move up and down If the thread takeup lever will not move I take it that the machine itself will not move at all which usually means thread stuck in the bobbin case ...

...lever. Leave thread on machine like you would begin sewing but u thread the machine. There should be a thread holder of some kind on top to run thread through to hold tension. Wind thread a few times ...

...Thread take-up lever does not move into a high enough position for me to thread cotton through the eye. Help please. You should be able to turn the hand wheel (on the right side of the machine) ...

lever, thread it through the eye of lowerlooper, then slide the lowerlooper threading lever back to the left (lining up the arrows) which returns it to standard position. It's when I return it

...thread jam. Depending on the machine there may be lever that will release the bobbin shuttle, and another 2 levers to release the cover plate. Pay attention to positioning so you can put it back ...

thread is the take up lever area. (the lever that moves really fast up and down as the machine is sewing) If the lever has been pushed to the left, it's possible the thread has wrapped up in that area

lever into the bobbin. Hold onto the thread end and slowly start to wind the bobbin. After a few winds of the thread, break off or cut the thread that is above the bobbin. Continue winding the bobbin

...lever. E4: You hit the reverse button while the bobbin winder shaft was moved over to the right. Move the bobbin winder shaft to the left. E5: On automatic sewing machines, the start/stop button was ...

...thread and jamb, feed dogs do not rise high enough to move fabric with lever in correct position. How do I adjust for proper rise? Have you moved the lever shown on page 12 or 13 in your manual? I ...

...trying to thread left lower looper but the lever will not move to the left side. if a part is worn or damaged or broken it's not going to move it need to be checked at a sewing machine repair ...