Necchi 3102 Mechanical Sewing Machine "touch sew lever stuck" Questions

sew fine but when I put the embroidery attachment on the raise presser foot lever stays on and I can't I've tried everything I can think of with no luck to get rid of it to embroider I

...Touch & Sew 756 is stuck in the up position. I can move the lever up and down but the foot will not move at all. Any suggestions? WD40 on the presser bar at the top and physically move the bar up and ...

Touch & Sew 756 is stuck in the up position. I can move the lever up and down but the presser foot will not move. Any suggestions. Very common thing because the presser bar is always very tight in the

...Touch & Sew Singer 457 Featherweight Case Odor Brother XL2010 Q's Does My Machine Have More Than One Belt? Cannot Seem To Adjust the Tension What to Do About a Gumming Up Needle How Tighten My Bobbin ...

...Touch & Sew Singer 457 Featherweight Case Odor Brother XL2010 Q's Does My Machine Have More Than One Belt? Cannot Seem To Adjust the Tension What to Do About a Gumming Up Needle How Tighten My Bobbin ...

sew in a straight line perfectly normally. help! If your machine is mechanical (NOT computerized), it most likely needs a thorough cleaning and oiling with good quality sewing machine oil. The old oil

...sew it only takes the top thread and it gets all stuck in the bottom with the bobbin, while the bobbin thread hasn't been touched. I've gone over the Manuel and I believe everything is threaded ...

...touch - but make sure to stop periodically because your hair dryer may overheat.) Test your machine. If you can determine that the selector lever/dial mechanics are not moving, you can try putting a ...

...touch of one of the silicone thread lube products may be helpful. I'd apply it to a piece of thread and then work the thread through the discs, rather than apply the lube directly to the discs. ...

touch screen of my machine pe770 isnt ... 10 answers Jan 25, 2019 SOLVED: Presser foot lever not working 1 answer Mar 29, 2018 SOLVED: Viking Husqvarna model 6440 gets stuck ... 2 answers Nov 24, 2007