Necchi 3102 Mechanical Sewing Machine "remove fabric stuck feed dog" Questions

...If moving feed dogs doesn't correct the issue, remove hook, bobbin, and needle plate. Look for fabric debris, thread, and broken needles. Clear area with a ...

fabric not moving was sewing fine until i changed bobbin and noticed thread stuck behind bobbin unit. i removed thread with tweezers. dont know how to check feed dogs You probably lowered the feed ...

...fabric stopped feeding. Then the machine stops and there is a huge knot under theneath. I cleaned out the thread and removed all the lint and the machine works. The proplem now is the feed dog will ...

...remove these 3 components, make sure there are no thread stuck in between the 2 hook pieces as well as the bobbin shaft. Most of them time, there are either fabric or thread stuck. If not, make sure ...

...is stuck in the machine under the feed dogs and I can't get it out Remove the needle, presser foot, needle plate, & bobbin. Snip at the fabric and remove in pieces with tweezers - do this

...Remove plate over feed dog, femove bobbin and bobbin casing. My guess is that you have debris, lint or a piece of fabric stuck in the works Also, check to make sure the stitch length is set high ...

...fabric. Appear to move up and down, but not forward to back. I had the same problem and had recently posted my own message, with no replies. Took it to a repair person and he fixed it at no cost - it ...

...stuck in the parts around the bobbin. I've removed the bobbin parts and cleaned and it still does it. change the needle also make sure the needle is right one for the fabric & thread clean under ...

Fabric stuck when sewing When i try to begin sewing on my husqvarna 950 it does not move and underneath the fabric is a big knot of thread. What is going wrong? Thanks Several things could be ...

...Remove any fabric that is in the machine and remove the presser foot and needle so you can see. Watch the feed dogs as you run the machine by hand. Are they moving at all? If they are... move them to ...