Question about Sewing Machines
...teeth won't raise back up after sewing buttons Cleaned and turned machine on and off. It usually re-raises the feed teeth. The Sapphire will not raise the feed untill it makes one or two stitches ...
Question about Husqvarna Sewing Machines
...wish to raise the feed teeth. The feed teeth will raise as you begin to sew. Look at #12 on page 2 here: ...
...Teeth do not raise, to low how do I raise them so macine will grab fabric Here is a link to page 22 of the manual. It shows you where to flip the lever to raise the feed dogs. If your feed dogs are ...
...teeth do not raise as soon as the button is raised. They won't come up until the machine makes a revolution, you will hear a click and then when the needle comes up the teeth come up. If they don't, ...
Husqvarna 950E, the feed teeth will not lower. I move the dial and they stay raised. Even when the embroidery attachment is on. Can I manually lower the feed teeth? If the machine has been taken apart
...teeth will not raise to feed the fabric. Refer to the instruction manual or contact the manufacturer for assistance in locating and operating the feed dog switch. Professional servicing: If the above ...
Question about Husqvarna Sewing Machines
...teeth will raise themselves next time you do regular sewing with a clunking noise - not really loud, but you can hear it. The feed teeth on my Des.1 are on the far right-hand side too so I think that ...
...teeth have dropped and I don't know how to raise them. Look in your owner's manual. I'm sure your machine has a reverse feed button but don't know if you can manually disable the feed teeth. ...
...teeth are in your eyeline and they should only be just above the plate, if you raise them up above what they should be you are in danger of breaking the needle plate and even the teeth holder which ...
Question about Sewing Machines
...2037 sewing machine and it works but the feed teeth lever is broken. I can't lower and raise the feed teeth. Any suggestions? It must be replaced; meanwhile you can use a flat wood stick to lift
72 questions posted
Usually answered in minutes!
111 Questions
91 Questions
75 Questions
44 Questions
29 Questions