Necchi 3102 Mechanical Sewing Machine "needle keeps hitting foot" Questions

...needle keeps hitting the plate .what do I need to adjust to keep the needle from hitting the foot I put the foot on .when I put needle in the down position it hits the ruffler foot You may need to ...

needle keeps hitting foot, won't sew have you tired changing the needle--flat side goes to the back of the machineit's also possible that the machine is out of timeor that the needle shaft

...keeps breaking. Yesterday I realize it is hitting the pressure foot. I have changed out the needle (size 14) about 7 or 8 times now. I have adjusted the tension. I don't know what else to try to ...

...capability allow you to adjust the position of your needle ? right, left, or center. If your needle is not positioned correctly, it may be hitting your needle plate or pressure foot. Hope this

...needle keeps hitting the walking foot the needle needs to be changed since it's hitting the walking footalso the machine could be out of time since the needle is hitting the walking footit needs ...

...needle will not stay positioned to the side and keeps returning to center hitting the center of the zipper foot and machine stops dealer said problem is because the 750 is not recognizing the zipper ...

needle plate, it keeps hitting on something. The needle works fine by itself and with the other feet. It is on center position. What am I doing wrong? Help! Take the needle out and run the machine for

...needle hitting the presser foot? If so, it could be the wrong presser foot for your machine (especially if it is not attaching properly), could be the wrong needle for the machine or is installed ...

needle keeps hitting the pressure foot and breaking I have a babylock sewing machine and the needle keeps hitting the pressure foot and breaking. I have tried several different needles, and different ...

needle keeps breaking because it's hitting the square part of the presser foot that it goes down into. If your machine has multiple needle positions, make sure the needle is set in the center position