Necchi 3102 Mechanical Sewing Machine "installing shuttle" Questions

...installing the shuttle. Have patience! Once you've done it a couple of times, you'll wonder why it was so difficult. It usually helps if you can tilt the machine back about 45 degrees so it is ...

Can't reassemble shuttle hook and shuttle race Have Baby Lock 1556. Removed shuttle hook to clean shuttle race. Can't get it reassembled. Manual isn't much help. the hook driver (still in machine) is ...

How do I put the shuttle race and the shuttle hook back into my front loading sewing machine? You didn't provide the make & model of your machine, but one of these may be helpful: install bobbin ...

My Singer QuikFix stopped stitching. The pink part that catches the needle's thread has stopped turning. Seems like it gets caught at the 6 o'clock of it's turn. I can't seem to find anyway to get ...

I ordered a new bobbin shuttle case for my singer 6423 sewing machine. I have received it but now cannot figure out where the little round gasket (or o-ring or whatever it is called) goes. Does it go ...

How do i put the shuttle back correctly to stop needle hitting shuttle If you are inserting the shuttle and locking it in place but the needle continues to hit, the needle may be bent. If a new needle

brother innov-is cs8080. Tangles underneath all the time Sometimes top thread wraps around the shuttle. Will not move forward. Have cleaned shuttle and changed spool but still not difference. Could ...

The upper thread becomes jammed inside the lower track of the shuttle. What can I do? Model # 7133. The needle will go into the shuttle below and catch the bobbin, but it won't come back up. When I ...

My machine is a Brother XL5600; I think I am having a shuttle hook problem. When I lower the sewing needle to "catch" the bobbin thread and pull through- it won't catch and pull through. I have ...

I have a 15212 model sewing machine & have hardly used it. When sewing the other day a few stitches went out of the fabric and got stuck. I opened the shuttle assembly, cleared the tangled thread ...