Necchi 3102 Mechanical Sewing Machine "diagram thread bobbin" Questions

...thread. There is a diagram across the top of the machine with numbers(1, 2, 3, etc) detailing where to put the thread and how. Your bottom thread, otherwise known as your Bobbin, will have the same ...

...Diagram If the upper thread is not picking up the bobbin thread, be sure to install a brand new needle. A bent/damaged needle sometimes will not pick up the bobbin thread. If the new needle doesn't ...

...thread the machine according to the diagram on the machine. Wind the bobbin according to the instructions in the manual. Place the bobbin in the bobbin case. Draw up the bobbin thread by turning the ...

...thread looping around in the bobbin holder. Damn machine! :) most janome's have diagram's on the inside of them check your diagrams and manuals carefully to make sure you have the bobbin and thread ...

...thread the bobbin Check out these instructions and diagram. Good luck. Paste this link to your Address bar... ...

...thread and use bobbin in Elna 210 sewing machine I can't see this manual available at the usual spots of: www.sewingpartsonline.com www.sewusa.com or www.diplodocs.com but you could email either ...

...diagram correctly. You must pull your thread through a hole in the bobbin,threading from the inside of the bobbin to the out side .hold the thread on the outside of the bobbin and wrap thread around ...

...Diagram Thread Bobbin on Newhome Sewing Machine HINT: install a brand new needle. Remove the top thread from the machine. ALWAYS RAISE the presser foot and then rethread the top thread. The upper ...

...diagram. Hold the end of the thread as it comes from the needle and manually turn the flywheel to lower the needle down and up once to catch the bottom thread and bring it up to the needle plate. ...

...diagram to thread machine is very unclear. Can I get a better diagram. The machine is relatively simple to thread. This is what I do and I've had no threading problems. 1. Put thread spool on the ...