Necchi 3101 Mechanical Sewing Machine "push pedal needle" Questions

push the foot pedal and needle doesn't move it is plugged in correctly, the thread and settings are all correct but when i push the foot pedal, it just "whines" and the needled doesn't move. switch ...

Push on pedal, hear the motor, no motion, arggg I turn the machine on, and without even using the pedal i turn the knob so i can thread the needle, no movement at all, the same when i do try to push ...

pedal cord is pushed in correctly rethread the machine top & bobbin clean under the needle plate where the feed dogs are for lint also clean the bobbin are for lint or loose threads change needles

...by hand gently up and down into the bobbin area. I let my top needle pick up the bobbin thread this way before using the pedal. I pull a long strand of bobbin thread out before pushing the pedal

...push the pedal and the machine runs, but the needle does not move. the set screw that holds the needle on the bell crank has backed off! you need to remove the front covers and go into the bell crank ...

Needle no longer controlled by Balance wheel or foot pedal, instead, manually turning Clutch knob now operates needle. How do I fix this? sometimes the balance wheel has a portion that either pushes ...

...pedal. The second is, when you push the bobbin winder, it engages a clutch that diverts power from the needle shaft to the winder. It is possible that the clutch is stuck. To find out, disengage the ...

...between the foot pedal, and needle and hand wheel, is broken, because if I sew with the hand wheel, everything is fine. Make sure that you pushed the bobbin winder all the way to the ...

when i push the pedal needle not going up and down 1st check the pedal for wiring issues.

pedal. Your reverse reinforcement stitch button was pushed or needle position was pushed while bobbin winder was moved to the right. You can download a free manual brother-usa.com and you will see all