...manual for cams Do you know where I can find the manual how to use the cams on a Kenmore 1601 sewing machine The cams are at the top their is a screw that you change the cam with go online for a ...
Question about Kenmore Sewing Machines
...manual for this machine This video will probably be handy, although not quite your model, it should be very close. Generally, your machine should be able to do straight & zig-zag stitch without ...
Question about Elna Sewing Machines
...manual. I can't find any way to remove it, and we have 17 other cams to try. The cam has probably been on the machine for twenty years or more. Perhaps it is just seized? try going to the ...
Manual" For cams, you should probably first check with Sears. If yours is an older machine, the cams may no longer be available through the manufacturer. In that case, check eBay for used accessories.
...html Email your parts request to them. Or you can contact your local dealer. You can get an owner's manual from; ...
Question about Singer Sewing Machines
...cams are 90 degrees off, but just rotating the cam stack didn't help. There must be somewhere else to adjust them. Go to www.sewingmachineparts.com you can order a manual for any sewing ...
Question about Kenmore Sewing Machines
manual and how to locat and purchase cams Check with Sears. They carry a lot of manuals for Kenmore machines. As for the cams, they probably are no longer available unless you can find them for resale
Question about Sewing Machines
...manual says to, but the button does not go down to release the cam. Is this a Supermatic (green), Star SU (white with blue top) or an Air Electronic SU model, I'm guessing that it is one of these ...
Question about Necchi Sewing Machines
...in my necchi supernova. Could you please help me? I do not have a manual for my Necchi supernova, I would like to learn how to use the cams check with sewusa.com about a manual or email them about ...
Question about Sewing Machines
I need Service Manual or Mechanical Schematic Brother XL5011 Horizontal feed not working, and can't figure out its operating principle. Main shaft has an eccentric cam near the rear, but my machine ...
65 questions posted
Usually answered in minutes!
111 Questions
91 Questions
75 Questions
56 Questions
29 Questions