Singer 2732 Mechanical Sewing Machine "run itself" Questions

...run it for a couple of hours before it makes a squeeking sound then shouts itself off make sure it is clean and well oiled. Sorry to disagree, but Husqvarna machines don't get "oiled". You will muck ...

...minutes, it will run by itself when plugged in after 15 minutes, it will start to run on its own (not pressing on the pedal) removed the capacitor from the fool pedal. Thanks to ...

...run if the spinal is turning then its the bobbin if not then you have a problem with the winder itself.  I had the same problem with mine and after doing the above it turned out to be the winder ...

...run FAST....how can I get it to stop? Everything I could find... if you turn the machine on and it's running by itself then the machine may have a short in the wiring,, or there could be something ...

can my old machine be fixed Machine runs continuously when foot control plugged in. Motor smoking and burning smell when foot control unplugged. Is motor burnt out? Husqvarna Combina 2 purchased mid ...

...a 1973 Bernina Record that I have been using quite regularly in recent months. It suddenly started running by itself. Is there a fix for this problem? Generally, it is a problem with the foot

...itself, i guess, and worked just fine last time i used it. i haven't used it in a few months and it's only slow when i run the needle and bobbin. it's fine when i load the thread on the bobbin, but ...

...run state. 2. Most common to the foot control itself is that the actuator for the slide resistor is broken and stuck in the max run spot as well as having been disconnected from the on/off micro ...

My sewing maching runs by itself. It is an older Viking from the early 70's. Undo the foot control and take out the little square suppressor that will cure the problem

Motor won't stop running Motor stops and starts by itself there could either be a short in the motor or the motor may be going out