Question about Singer Sewing Machines
...presser foot doesn't move up or down in my singer 500a. The presser foot lever move up and down but not gone presser foot. It is an old machine and possibly the presser foot has became rusted. This ...
Question about PfaFF Sewing Machines
...presser foot to a pfaff sewing machine model 2144? Presser Foot cord is a female plug and the cord attaches to inside of the presser foot. I have the presser foot completely apart but once it is ...
...presser foot and press the foot pedal. The presse1r foot symbol is blinking as if I have not put the foot in the down position. The machine beeps 3 times and will only do the 1 down stroke of the ...
Question about Bernina Sewing Machines
...presser foot only raises slightly (about 2mm), it might be due to this safety setting. To resolve this, change the setting from the maximum of 2mm to a maximum of 6mm. Remember to switch it back to ...
...presser foot lift lever on many newer janome sewing machines will wear out with use. It can easily be replaced by a sewing machine repair shop or Janome dealer. Or you can look online for a "presser ...
Presser foot wont raise and lower My designer 1 hisqvarna has been working fine and then it all of a sudden will not lower or raise the presser foot. I had to remove the whole presser foot attachment ...
Question about Kenmore Sewing Machines
...presser foot for it, is there one and where would I get it/ You first need to determine which shank the presser foot uses on your machine. You can compare your shank (current presser foot) with these ...
...presser foot? If so, you can replace it with a short shank zig-zag presser foot. You can probably go to a regular sewing machine repair shop and find a replacement presser foot. **NOTE--the links ...
Question about Kenmore Sewing Machines
presser foot on my Kenmore 158.441 sewing machine is locked in the down position If the lever for the presser foot on your Kenmore 158.441 sewing machine is locked in the down position, there could be
Presser Foot error We have a Aurora 440QE, and there is a continuing problem with the sensing of the presser foot. We have taken the machine & computer in, and have been told that there is nothing
235 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions