Singer Quantum XL-1000 Computerized Sewing Machine "presser foot center" Questions

...presser foot is disconnected. How do I fix it? If the presser foot isn't connected to the presser foot shank, place the foot under the center of the shank. Lower the presser foot lifter making sure ...

...right during the adjustment process. the needle must be center of the presser foot & needleplate hole,, if this is not centered re-adjust to the center of both needle foot& needle plate

presser foot not lined up correctly? needle is hitting the needle plate. Is your needle position centered? The round dial on the top right is a combination zig-zag stitch width selector and the center

...presser foot so that the center line mark is in the center of the needle opening in the buttonhole foot. With the main part of the foot pushed to the back, lower the presser foot lever. 5.Lower the ...

...presser foot that it goes down into. If your machine has multiple needle positions, make sure the needle is set in the center position. Also, make sure you are using a zig-zag presser foot where the ...

Presser foot I broke the small center 'spike'? ,for lack of a better word, on my presser foot for by 'BL450' Proline serger. I just need the All Purpose foot, but I cannot seem to find it anywhere for

...presser foot get out of alignment for a pr600ii embroidery machine? Hi, Putting hooped items onto the machine can bump a presser foot and bend it. a strap/handle on a tote bag can catch and bend a ...

...presser foot move up and down like it's sewing then presser foot goes all the way to the plate on bottom won't move and the screen says presser foot too high... any suggestions of what could cause ...

Presser foot wont raise and lower My designer 1 hisqvarna has been working fine and then it all of a sudden will not lower or raise the presser foot. I had to remove the whole presser foot attachment ...

...presser foot only and about 1/16" of it. In looking at the needle plate opening with the needle in position, it looks like it is on dead center. Seems like the presser foot shaft need to be moved to ...