Singer Quantum XL-1000 Computerized Sewing Machine "needle plate" Questions

...needle plate. As the needle starts on the upswing, the hook should meet the needle just above the needle eye on most machines. If it isn't meeting at that point then your hook timing will need to be ...

...the mount so that it is straight up and down. If the needle is still hitting the plate, the needle bar may be bent. That may be not be repairable even by a professional. I hope this helps. Cindy ...

...needle-plate, there is a hole in the back with a ***** slot showing. How do I adjust that? What is it for? It adjusts the needle plate position front to back. It is most likely the screw that holds ...

...needle plate of my Bernina 1300 MDC or do I need to buy a new needle plate? Thank you. Yes you can substitute the appropriate needle and glue them in place as long as the needle plate is not ...

...needle plate. If that doesn't work,change your needle plate. If you've been using a straight stitch needle plate (a plate with a small hole, often used for sewing fine, delicate fabrics), switch to a ...

...needle plate front to back. :) Some needle plates snap into place, but others are held by a small screw (sometimes two). It shouldn't really have any adjustment capability--because, when using a ...

...needle plate instead of going into the hole. Just guide your fabric, letting it feed on its own. * Check your needle plate and make sure it's securely in position. * Change your needle plate. If ...

...needle plate won't stay tight--when you put the plate on it moves around and is easy to take off I had to remove the plate to blow air for dust and the plate fit back on very loosely and not tight ...

The needles can be replaced but need to be secured by riveting and or epoxy glue. Most often the needle plate is cracked and neither of above will hold to do it right. Replace the entire needle plate

...needle plate instead of going into the hole. Just guide your fabric, letting it feed on its own. * Check your needle plate Make sure it's securely in position. * Change your needle plate If you?ve ...