...Connection Error. Check that USB cable is connected and power switch is turned on." My USB cable is connected to bothe the computer and machine and the power switch is on. Help please! Go to the ...
...Error E924 at JUKI control it means Motor driver failure ( Motor driver has broken.) or you can first check motor connection if connected secure or there's lose connection. other ways try to change ...
Question about Sewing Machines
MACHINES IT IS GETTING AN ERROR 12 Error 12 on a Tajima TME-C612 embroidery machine typically indicates a problem with the machine's control panel or its communication with the machine's control board
Question about Kenmore Sewing Machines
My Kenmore 385.19923 sewing machine is showing an E1 error. what does this mean/ When I turn the machine on, it growls & E1 error message shows All the Error codes and the fixes below. ...
Connection error. Check that the usb cable is connected and turn on the machine". The machine was turned on. Any ideas? The machine is old so is it possible that I need to replace the usb port on
...CONNECTION ERROR JUKI CYCLE MACHINE AMS 210D PANNEL CONNECTION ERROR h there please check connector J14 at main board if problem still i think need to chane panel or main board best regards ...
...error message that my machine is not connected to the pc/not turned on but it is connected and on...when I unplug the machine, my computer makes the sound it does whenever a usb device is unplugged. ...
Connection error, check usb cable.... I have the original cable, I purchased a cable and I still get the error message. When I unplug and plug the cable (either machine or laptop) I get the sound of ...
...I know Singer Futura machines require a USB cable connection to work; check USB drivers are installed properly on the compatible version of windows as well. Cheers, Embroidery Services San Diego, ...
Question about Juki Sewing Machines
...Error E004 can you please tell me the control Box model? generally E004 means: 1-Synchronizer lower position sensor failure ( SC-500 / SC-510 ) cause : ====== • When position detection signal is not ...
235 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions