...thread getting caught under needle plate? thread is getting caught somewhere under the needle plate in the bobbin area and locks up the machine. It was sewing fine and I ran out of bobbin thread. ...
...thread getting caught in the bobbin shuttle. I disassembled this area, found a random thread, and cleaned it out. I put it all back together but now the needle tread ALWAYS gets caught down there. I ...
Question about Juki Sewing Machines
...thread is not caught or looped around any of the machine's components. Try using a different type of thread. Some threads are more prone to breaking or getting caught in the machine than others. If ...
...thread gets caught in the bobbin. When I my top thread gets caught in the bobbin. When I cut the thread there is a doubled up top thread on the bobbin side of the fabric as well as a single thread on ...
Question about White Sewing Sewing Machines
...thread gets caught beneath the needle Hi. So is this a horizontal hook? Where is the thread getting caught beneath the needle? Maybe on the hook? Check your upper threading to make sure the thread ...
Question about Baby Lock Sewing Machines
...off. Check if there is thread caught in anywhere along the running mechanism, especially in the lower bobbin area. If there is no thread caught make sure the tension on the thread is not to
Question about Sewing Machines
...thread is caught I have been using my futura 350 with no problems...until now. I don't know what I may have done, but the upper thread is catching in the bobbin area-not where the area where the ...
...caught by upper thread. Needle moving fine, no obvious damage to bobbin carriage. try rethreading the machine top & bobbinchange the needle--flat side to the back of the machine, make sure the ...
...thread get caught on, that's what I did. On the PE 770, I kept having problems with the upper thread breaking or tangling. The upper thread spool placed horizontally is very problematic. Like ...
...thread gets caught around the bobbin case wheel is that the thread is looped around the feed dogs once and that causes the thread to get caught around the bobbin wheel. In conclusion, thread the ...
77 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions