mode 11 is not set to correct value. SOLUTION: To set Adjustment mode 11 to proper value, perform the following: 1. Enter Tech Rep mode (Counter, Stop, 0, 0, Stop, 0, 1). 2. Press Stop and then Start.
...mode 11 to proper value, perform the following: 1. Enter Tech Rep mode (Counter, Stop, 0, 0, Stop, 0, 1). 2. Press Stop and then Start. AJ- will display. 3. Enter 11 from the keypad. 4. Press Start. ...
...info contained in the service manual although I doubt it will help. C03FF - Improperly set Adjust Mode 11 ? An incorrect setting is made of Adjust 11 In machine setting mode change the value to ...
Question about Konica Minolta Office Equipment & Supplies
Mode, System 2, Unit Change. 11. List Output - Please Load 8.5x11 Landscape paper on Tray 1, go into Service Mode, List Output, and Touch Machine Management List and press Start. 12. Press Adjustments
...machine OFF/ON to exit the 36 mode. Attachments: PLEASE NOT THIS IS A LEADEDGE ADJUSTMENT.THE REIGIST ADJUST IS THE SAME STEPS JUST CHOOSE REGISTRATION OPTION ,AND MAKE SURE TO FOLOW PROPER
Question about Konica Minolta Office Equipment & Supplies
...11 × 17 L-size paper into the 1st drawer. ❍ Letter C, A3 L or A4 C can be loaded instead. 2 Press the [Utility] key. 3 Touch [Admin. Mode]. 4 Using the keypad, type in the ...
minolta di183 C03FF Go to Adjust Mode 11, change the setting from 0 to 1.
Question about Minolta Office Equipment & Supplies
DIALTA DI 183. What does code CO3FF indicate? Minolta di183 C03FF minolta di183 C03FF Go to Adjust Mode 11, change the setting from 0 to 1.
adjust the laser beam pitch for 600 dpi, using the same procedure as for 400 dpi (use the SP modes for 600 dpi). . 4.2.3 TEST PATTERN PRINTING (SP2-902) NOTE: Do not operate the machine until the test
The print of Panasonic FP-7835 is very dark. What is the darkness control code of Panasonic FP-7835 Photocopier Go to F6 mode 11 exposure adjustment
73 questions posted
Usually answered in minutes!
1,023 Questions
924 Questions
417 Questions
321 Questions
302 Questions