...drive bell. The agitator will not bottom out flush with the tub. 8. Close the washer lid and plug the washer power cord back into the wall socket. The defective agitator is the cause of the drum not ...
...for any comments! Poco try replacing the drive bell, which is underneath the agitator. take the agitator off and unscrew the drive bell. remove and replace. the drive bell is most likely
Question about GE Washing Machines
...agitator drive bell needs replaced have the part. problem is the old drive bell or hub is stuck inside at the top of the agitator itself. how do I get it out? This machine doesn't have Ag dawgs The ...
...agitator is a drive block (number 310 as shown here). The agitator snaps on to it. Inside it is splines. Since the drive bell is plastic them splines will wear smooth and as a result she won't ...
Question about General Electric Washing Machines
...cycle, trum moves but doesn't agitate clothes That is a striped drive bell. An easy fix. Yank off the agitator and remove the bolt, replace the drive bell, not too hard a job; I have a manual ...
...agitator is off, the drive block is underneath and once you remove it you will see the stripped teeth. http://www.repairclinic.com/PartDetail/Drive-Block-or-Bell/1264702 Here is a picture of a ...
agitator drive (bell) (white plastic bell shaped) on top of the agitate shaft is not stripped. You should not be able to turn. To remove the agitator fill first about 8 in of hot water, drain and pull
...agitator and the bell. The splines on the shaft and the groves in the middle of the bell don't seem worn at all. Any other ideas as to what I neeed to look at? Martin Check the motor/transmission ...
agitator on my washing machine..? I think it's the drive bell or hub...how do I remove the old one? the G.e style agitator just pulls right out and straight up but it may be difficult as it gets stuck
...drive pulleys, they are OK. Removed agitator and bell coupler to check spline. Other than dirty, grooves of spline appear OK. However, noted after cleaning, Bell coupler spins feely even with screw ...
1,338 questions posted
Usually answered in minutes!
874 Questions
371 Questions
398 Questions
323 Questions
255 Questions