GE WDSR2080D Top Load Washer "water overflows fill" Questions

...fill valve shuts off, water continues sipping into tank slowly. This causes water continuously overflow through overflow tube. I hear hissing sound of water in background. New fill valve was put in. ...

water will not shut off keeps filling and overflows washing machine will go through cycles but it continues to overflow with water, had to shut water supply foo at valves and **** water out with wet ...

water is overflowing unplug the unit and see if it still overflows or continues to fill. no fill If it stops when unplugged. Then it is not a water inlet problem but an electrical signal problem going

...overflows. the water level sensor is not working and needs to be replaced Hello,Sounds like a problem with either the inlet valve or the pressure switch, way to determine which on is while it is ...

...overflows. Do i need to replace a pressure sensor or some kind of water meeter so that the washer machine "clicks" and begins to wash the load instead of overfilling? keeps filling with water Set the ...

overflows water when filling Washer overflows with water sometimes when it is on the first fill or sometimes when it fills to rinse but not all of the time. The water level switch is either bad or the

...water, telling them when to fill and when to close. I would run the machine thru a fill cycle with the washer back off, and with a voltmeter, observe if the voltage ever cuts off as the timer runs. I ...

...water until it overflows. Whatever level is set, the machine keeps filling right to the very top. It would overflow if I don't stop it. I can empty and drain by turning the dial manually but the ...

...water and overflows after the cycle is finished. Perhaps overnight water slowly fills the tub. This is due to the water inlet valve not shutting off all the way. The Inlet valve assembly needs to be ...

...water, it overflows when washer is filling with water it continues to fill, and overflows Hi, The soleniod valve is bad.... here is a tip that will help...the problem you have is with the same part ...