GE WSXH208A Front Load Washer "broken shocks" Questions

...broken shocks have anything to do with that? not agitating, not spinning, and shocks are broken Your broken shocks could have disconnected some wires due to the vibration. Plug off the wall, open up ...

shocks (known as dampers) have broken or come off. The dampers should not slide in & out freely, if they're defective, replace. Tighten all loose wires, which may have come loose, future probs, so you

Washer tries and fails repeatedly to enter final spin Had a broken shock but have replaced it. Drains fine. Depending on the model number, if a shock has broken the tub might have a broken inner spin ...

shocks had broken at upper mounts. Also, drum now spins freely by hand, even though belt is attached. Wondering if the broken shocks is a chronic problem, and what would allow the drum to spin freely?

...the Vibration damper rods to be sure that... 1. They are there and mount is solid. 2. If they are broken in 1/2. 3. The plastic knuckle mounts are not missing/broken. 4. There is oil in the shock ...

broken shocks The drum on our front load washer stopped spinning the other day. I can hear a clicking, as if the motor is trying to kick in, but nothing happens. On inspection I discovered that one of

...broken shock mount, repaired. Still shaking horribly. The only parts I can see related to the suspension and balance are the four shocks on bottom and 1 each suspending springs on top. Can the ...

...shock absorber and must be changed out as a pair. Also one of the springs that supports the tub was broken. My guess is that the spring broke and the shock failed shortly after. since it was more ...

...shock kit (twice) still bangs. At first I thought bang ( out of balance problem) was because of the broken shock Now I think drum out of control cause shock to break and I dont know what would cause ...

A broken shock, how to change? I opened the back of my GE front end loader and the shock absorber is broken, how do I get the pins out to change? They have little plastic tabs that need to be pushed ...