...heater from the 4 wire side to another heater, the side with 2 wires. Tried breaking the crimped splices skinned then wire nut to feed out to another heater. The second heater is not working.Is this ...
...a wall mount heater not sure on the wiring .heater has 3 wire black red and blue sources has white and black what wires go together How do i wire a night store heater when using a fixed cable ...
...wire heater have 12-2 to t-stat from panel and then have 12-2 to baseboard unsure of what goes to what thanks for any info. I hope you are using a Line Voltage Thermostat!! First, make sure that the ...
Question about Cadet Manufacturing Heating & Cooling
...and the red and black wire from the thermostat.... Hot wire from power source to Black wire to thermostat, Red wire from thermostat to Black wire to heater. Other Black wire from heater to
...wire to the third heater. also hooked up ground wires in each of the units. Have I correctly wired these units together yes, you did a good job. Sounds like you paralled them. Which is right buuuut ...
Question about Fahrenheat Heating & Cooling
...heater red-sheathed wire to the wall thermostat, which is a Dimplex 2 pole thermostat. I have wired everything in accordance with the wiring diagrams. The Black and Red wires from the sub-panel are ...
...heater by wire nuts and the copper to ground. With the thermostat on I am getting no heat... I thought it might be a defective heater and exchanged it... the same problem. Any ideas? Thanks Wayne ...
Question about Fahrenheat Heating & Cooling
Where do the black, red, and white wires connect to on the heater? White wire to the green ground screw. the black and red to the two wires on the heater and it does not matter which one to which wire
heater Do I use 2 wire (with ground) or 3 wire (with ground)? If 3 wire, what do I do with the white wire? Your question is kind of vague, but the 240v goes to the heating element, if the heater has a
in conduit. I would suggest that you up size your wire to 10 guage and your breaker to 30 amp as well. Then double check your heater wiring connections to insure that they're wired the same throughout
145 questions posted
Usually answered in minutes!
1 Questions