...spray the glass cleaner directly on the glass. Clean the scanner glass with the lint-free cloth. Figure 4: The scanner glass Clean the glass strip next to the scanner glass with the lint-free cloth. ...
Question about Canon Office Equipment & Supplies
...apart from the misalignment. Running at the end of my tether here - any help? YOU MUST BE USING REFILLED CARTRIDGES. AFTER A COUPLE OF REFILLS THE TECHNOLOGY USED BY EPSON IS "BUBBLE JET" TYPE WHERE ...
...spray solvent that I got from Pep Boys. Took the printer apart and cleaned where the ink meets the printer head. Any questions, fell free to email me. ....sptrainboy Checck your Manual HP technicasl ...
Question about HP OfficeJet Office Equipment & Supplies
...head will slide to left with a gentle push. Check if the traction belt is in tension, you may need to replace the traction belt or the motor. Try moving the carriage on the rail, if it does not ...
...spray a cleaner/solvent where the ink meets the printer head. It may be that the black ink has dried enough not allowing ink to go through the nozzle. And now that it is in the attic, all of the ...
Question about HP OfficeJet Office Equipment & Supplies
...head should be carried out. In doing the manual cleaning, one should spray Windex heavily on paper towel and wipe off the surface of the print head. ...
Question about HP OfficeJet Office Equipment & Supplies
...head to return. Wait, and it should help clear the blockage, caused by dried ink. What happens with ink jet printers when they do their cleaning is they spray a little bit of ink into a small tube ...
...head, with spray jet -function, use this to deep clean the actual print head.) -Dry it up carefully, do not wipe actual print head, just tap gently with soft paper. -Install ink tanks, install ...
...head dry then fix it back. Now Try to print something now If that does not work then follow the next step. Remove the printer data cable & restart the PC & printer. Then fit back the data ...
Question about HP OfficeJet Office Equipment & Supplies
...head, take it outside and spray with compressed air into all orifices to clear out and help evaporate any remaining solvent. Let sit on a clean paper towel for approx 20 minutes. (There may be a ...
1,036 questions posted
Usually answered in minutes!
2,817 Questions
1,584 Questions
1,223 Questions
991 Questions
857 Questions
