Question about HP OfficeJet Office Equipment & Supplies
...black and white. Hello, The line issue is caused by something on the image sensor. To get to it and clean it just pull the front up where you put the paper into it to scan. Inside you will find a ...
Question about HP OfficeJet Office Equipment & Supplies
...black lines across the whole page Hello, You have a dirty scanner glass strip. If you open the cover like you are going to scan a book on the lft side you will see a strip of glass separate from the ...
...black lines. It is hard to explain without actually showing you. To fix the problem, lift up the top to expose the glass. Look to the left of the big rectangle glass. There will be a 3/4 inch glass ...
Question about HP OfficeJet Office Equipment & Supplies
...strip of glass seperate from the main plate. make sure there are no marks on this, usually correction fluid or ink from ballpens likes to get smeared on here when using the feeder causing a perma ...
...any paper on the glass. Load paper in the paper tray. Do either of the following: Press Start Copy Black to start a black-and-white copy job. Press Start Copy Color to start a color copy job. If the ...
Question about HP OfficeJet Office Equipment & Supplies
...strip is a light grey colour and passes through a sensor in the carriage. It can be removed by carefully removing the black plastic clip on the right then releasing the spring plate clip on the left ...
BLACK. COLOR LOOKS GREAT. IVE CLEANED THE PRINT HEADS AND ALIGNED THEM. ANY OTHER OPTIONS? THANKS Solution one: Reset the product If there is static interference, or loose connections with the product
Question about HP OfficeJet Office Equipment & Supplies
...strip. Figure 3: Removing the clear nozzle protective tape 1 - Protective tape Look at the number on the print cartridge label and make sure it is compatible with your printer. Compatible print ...
...strip is intentionally not sticky so the scanner can calibrate colours better without the glue getting in the way. Check that the scanner "head" isn't rubbing on anything. It should move from end to ...
Question about HP OfficeJet Office Equipment & Supplies
...covering part of it. Most copiers don't use the full size scanning plate for copies, but use a strip that scans the paper as it moves across it. If something blocks part of it, you get the black
1,036 questions posted
Usually answered in minutes!
2,817 Questions
1,584 Questions
1,223 Questions
991 Questions
857 Questions