Sanyo DP42848 LCD TV "panel ribbon cable" Questions

...it reset it self Looks like a Tconn problem caused by 1 Main Power supply inside unit 2 Tconn board itself, or ribbon cable connections 3 panel, or ribbon cable connections from Tconn to

...Unplug the ribbon cable and look for black chipson the underside of it, I think they say 100 on them, you need toresolder both ends on each chip. Should fix the black line issue. panel is

...panel. Once you determine which ribbon cable is the problem, disconnect the power, wait AT LEAST 30 MINUTES FOR THE VOLTAGES TO DRAIN OFF and then carefully resolder the ribbon cable connections at ...

...glue i found was on the flange that held the ribbon to the lcd screen. they are talking about inside the panel where you cannot get to where the ribbon cables directly connect to the

...one of the ribbon clips that holds ribbon cable damaged and it does not hold the cable very well Socket retainers/clips are almost impossible to fins as replacement parts. You may try the

...panel. There are several ribbon cables that run across the top of the FPD module. It took a short while to disassemble the entire assembly. The fix I employed was to secure the ribbon cable using ...

panel, or a ribbon cable that needs to be reseated. 1. take a piece of tape and stick it where the line is. So you will know what cable you are looking at. 2. unplug the TV 3. Take the back off of the

...panel  and the ribbon cable but can also be caused by a faulty circuit board. if you open the back of the tv you can get to the ribbon cables and check to make sure they are connected

...Cable Ribbon Board = LG 6871QYH039B Model = 50HP66 Plasma TV need to replace the cable ribbon connecting the Y Sustain board and the Top Y Drv board. For reference, the connection location on the Y ...

...ribbon connections that go from the Tcon board to the LCD panel, the you just have to lift up the little tab on the connector that is on the Tcon board. It should flip up like a little hinge and once ...