GE JGBP33 Gas Kitchen Range "power failure oven work" Questions

power failure. Range burners and broiler work fine. Everything is dark when I turn on the oven (no orange light). I had a similar problem.The power failure might just have been a coincidence.Sounds to

...failure of the electronic oven control. This could be caused by a stuck keypad or an internal malfunction of the control. You will need to disconnect power and wait at least 30 seconds, reapply power ...

...power failure and my oven nor broiler won't I had power failure and my oven nor broiler won't start. All the other items will work, what do you think is the problem? Have you checked the circuit ...

...power failure it started working again. Now it stopped working again. Shut the circuit breaker down for 30 mins. The oven still didn't work. Where is the switch for the breaker in the oven? Will this ...

...power interruption (failure) the Electronic Oven Control will not light up. The oven will not turn on. There are no lights working on the electronic oven control. The top burners work fine and the ...

seconds until last error code is displayed. 2. Disconnect power longer than 30 seconds. 3. Re-apply power and observe for longer than 1 minute. 4. If failure remains, disconnect power, replace control

...power comes back on after a couple of minutes model mgs5770 Hello Susan, it is not quite clear to me what you mean. But I think, the ingition in the gas oven works and lights the burner. and then ...

power failure the burners work but clock and oven do not the clock did come on a few times with dim light and faded out 4/5 times now just burn ers work and not clock pad so cant even try to turn oven

oven sensor should be disconnected and tested for resistance and compared with the "RTD" scale. You can try resetting the range by disconnecting it from the outlet or switching off the circuit breaker

...power failure I was using my oven when I heard a bang and the Electronic Oven Control (EOC) went blank. I went downstairs and the breaker had switched off. I turned the breaker back on, and the EOC ...