Question about Kymco Mongoose 250 ATVs
...starter as long as the solenoid and battery are good... a 12v test light will help here Bad brushes. Check for continuity . Remove 2 leads going to starter. leave short jumper wire on. No ohms means ...
...12V + should be on it when the button is pressed. If there are two smaller wires, one is probably ground or (-). If no power, check the wire for damage, etc. by following the wire back to the starter ...
Question about Kymco Mongoose 250 ATVs
...that the red one is 12 volts. The black one should go to ground. If it has 12V on it, then it is the starter motor. If it DOESN'T have 12V, then the problem is that power is not getting to the
3 questions posted
Usually answered in minutes!
1 Questions
1 Questions
1 Questions