Kymco 2012 UXV 500i IRS 4x4 SE "main seal" Questions

...it indicates that the mixture is too lean at high rpms or load check adjust float level , clean out main jet or fit correct jet size if 2 stroke check for leaking crankshaft seals change the heat ...

...is $5.00. If won't idle still the compression is so low that it won't stay running Or possibly the main seals are leaking (a 2 stroke has top end & bottom end

engine dies out after driving 1-4 mile on a 2010 honda trx 420 I do need more info.. BUT, #1 the main ignition coil could be going bad..when it gets hot (electrically), it starts breaking down ...

...correctly is going to require a COMPLETE DISASSEMBLY - there are tiny tiny bits of aluminum in the main bearings, packed in between the main bearings and crank seals.. its in the main rod ...

...lever. I've cleaned/rebuilt carb replaced spark plug, flywheel, stator, fuel valve, fuel filter, main (choke) diaphragm with plunger and CDI. When in neutral and I accelerate it hesitates sputters ...

...seal the oil entrance connection to the cylinder with a good gasket sealer -NOT SILICONE - gasoline breaks it down!! The only jets in a carburetor that ever need replacing, under normal situations, ...